Manesia carbon brick for electric furnace uses eletro-fused magnesia, high-carbon graphite as the main raw materials, in which an adequate amount of anti-oxidant is added, using phenolic resin as the bonding agent, the product is characterized by good erosion resistance and thermal shock stability and it is widely applied in electric-arc furnace.
 |
| MgO-C Bicks for EAF |
Gunning Repair Mix for EAF Slag Line
The product uses quality dead burnt magnesia and other basic compound materials with a rational grain gradation composition. It has a good sintering property and erosion resistance, a small rebound rate in construction and a high adhesion to facilitate gunning repair operation. It is applicable to hot repair to such locations as hot zone, slag line, hearth slope, side wall,tap hole, etc. In an eletric furnace, an electric furnace with a super high power, being an ideal complementing material to achieve a uniform damage from erosion for furnace liner, increase service life.
 |
| Gunning Repair Mix for EAF Slag Line |
Taphole Flling Mass for EBT EAF
The tap hole filling is an essential material for eccentric bottom tapping from electric furnace. The product is characterized by non-floating up, high self -opening rate, being easy for operation ,being safe for using，etc.
 |
| Taphole Flling Mass for EBT EAF |
Hot Repair Mix for EAF Bottom
The material is prepared based on the principle of the most compact particle piling by selecting quality synthetizing raw materials and additives, bonding agent and sintering agent, which is characterized by a strong ability to resist permeation of molten steel, erosion resistance, being easy to get sintered at a low temperature, being convenient for construction, etc.
Precast Roof Cover for EAF and LF, Nozzle Well Block
Precast EAF roof Delta blocks are produced by combined casting from extremely fine powder by carefully selecting high bauxite, electro-fused corundum, chromium fused alumina, electro-fused spinel, etc. as main raw materials and adding efficient water reducing agent and efficient dispersing agent. It is characterized by such advantages as high strength, good thermal shock stability, resistance to high-temperature erosion, long service life, etc. It applies to large size electric furnace, LF refining furnace, VOD furnace, etc.
 |
| Precast Roof Cover for EAF and LF, Nozzle Well Block |
Ramming Mix for EAF Bottom
The product uses high quality synthetic MgO-CaO- Fe2O sand as the raw material and is formed with a rationa grain gradation. It has a good sintering property, high resistant erosion, convenient for construction and strongly integral. It can be used for initial placing and also for hot repairing, being applicable to such locations as bottom, hearth slope, etc. In an electric furnace with a high power, an electric furnace with a super high power.
 |
| Ramming Mix for EAF Bottom |
